By Guest Contributor, Digital Photography School – December 09, 2010 at 09:09AM
An introduction to Shooting Star Trails by Trevor Williams.
I will attempt to explain here how to capture stars over a long exposure so that they leave behind a “trail” or light stream. In fact, what are recorded are stationary stars and the rotation of the earth. The images that are created have a unique magic about them that captivate viewers.
A lot of people mention that their love of photography comes from capturing that perfect moment in time. When shooting at night those “moments” become a little longer. When shooting star trails those “moments” turn into hours. Capturing that perfect hour or two in time is what makes shooting star trails so fun for me. When I look at star trails pictures, they remind me that this big rock we live on is spinning out in space. For such amazing looking pictures the technique is really quite simple.
You will need a few things before you head out into the night especially a camera capable of shooting in “bulb” mode. You will also need a cable release and a location far way from any city lights. I usually look for a place with some foreground interest like some trees or old buildings. You should also make sure you are prepared for the environment and weather.
Before we get started, I suggest getting into your car and driving far away from the city. The amount of visible stars will greatly increase the farther away you get from any town. There are a few ways to go about shooting star trails. We will start with the basics that do not change whether one is using a film camera or digital camera. Before setting up the camera on the tripod it is a good idea to set the focus. In the dark, it is not easy to get the AF to lock on to anything.
I suggest trying on one of the brighter stars in the sky and if that does not work set the focus to infinity. It may seem to be the obvious thing to do from the start but not all lenses are perfectly accurate. If you do manage to get your camera to auto-focus be sure to set it to MF or manual focus before starting your exposure or it will star searching again when you start the exposure. Once you have set focus set up the camera on the tripod and compose the shot.
Try not to include any direct light sources, like streetlights, in the shot. One more thing to think about is white balance. I tend to shoot night skies with the white balance set to “tungsten” which gives a nice blue look. Warmer colors tend to give the sky a dirty look. I now suggest doing a test shot which aids in composing your final shot. A 2-3 minute exposure at high ISO and wide aperture is enough to be able to see which direction the stars are moving and allow one to imagine what the final shot will look like.
For shooting options, one could choose to do it all in one shot or shoot multiple shots and “stack” them after using computer software. I personally find that shooting multiple images and stacking them yields much nicer images than those done all in one shot. If you are going to do it all in one shot then your biggest concern should be noise.
To avoid noise, one could use a narrower aperture and a lower ISO speed but these settings will typically not pick up very many stars. If this is the route you are going to take, and I suggest at least trying it, then focus and compose the shot. Set the time value to “bulb”, the aperture to its widest, and with and ISO at 200, try for a 30-minute exposure with a wide aperture of 3.5 – 4.0. If there is too much noise then drop the ISO to 100 and either shorten the exposure time or try a narrower aperture.
If shooting this way is your only option, there is something that you can do to increase the appearance of the length of the trails in the frame that will be limited due to the short exposure time. The actual length of the trails is determined solely by time but the appearance of the trail length is determined by the focal length you are shooting at. For example, stars over a 30-minute exposure would appear much longer in the frame at 50mm than they would at 10mm. If you find that you are limited to shorter exposure time due to noise, or any other factor, try shooting at a longer focal length to increase the appearance of the star trail length in relation to the frame.
Now on to my preferred way of shooting which is multiple shots that will be stacked later using computer software. Shooting this way means one can shoot with a wide aperture and a faster ISO that will pick up many more stars than the previous method. One can do this because noise becomes much less of a factor.
Noise generally increases with time so you only have to worry about 30 seconds that means even at ISO 800 it is not really going to cause a problem. There is even an option to include dark frames, which are frames shot with the lens cap on, so that even the tiny bit of noise from ISO 800 over 30 seconds will be removed. With the higher end DSLR’s and the improvement of sensor noise reduction in recent models means that the ISO can be bumped even higher that will result in even more stars.
You will need to find the balance for your camera. Now with the evil “noise” taken care of the only thing limiting your exposure time is your battery life. For this method it is necessary to use a cable release and it is also important to make sure there is plenty of space on your memory card. To get started, set your focus and compose your shot. Set the aperture to its widest and the ISO to 800. Dial in 30 seconds for the time value and the drive to “continuous shooting” mode which allows for non-stop shooting when the cable release is locked. I suggest doing a test shot first to see if it looks all right. If anything is too bright then dial the ISO down.
Once you have taken the shots you will need to stack them using software. I recommend a freeware program, startrails.exe, available from www.startrails.de. Simply import the pictures, hit the ‘build’ button and wait for it to finish rendering. Don’t forget to save it when it is finished, as the there is no auto-save function built into this software. This is only available for Windows but there are many free actions for Photoshop if you are using a Mac. Simply search “star trail Photoshop action” and you will find what you are looking for.
Single Image
Stacked Image
To complete the shots, an idea is to include a foreground element, like a structure or tree, and light it with a flashlight or flash. I highly recommend testing out how much light is needed before locking that cable release. Too much light will distract from that beautiful star filled sky you are about to create. For foreground lighting use a warm color if you chose to use the recommended “tungsten” white balance.
If you use LED light with such a cold white balance setting as ‘tungsten’, you will find objects in the foreground look very blue. To avoid this, you could apply an amber gel to a flash or use a tungsten light source like a flashlight that has a ‘regular’ light bulb as opposed to an LED bulb. I also suggest doing the foreground lighting at the beginning and again at the end incase one of those is unsuitable for the final shot. You simply exclude those frames from the stack.
If it was done in the middle and a mistake was made leaving those frames unusable it would create a break in the trail that would take away from the shot. A final note for those with experience in night photography, keep in mind that you are now shooting wide open with your ISO bumped to 800 so adjust your lighting techniques to accommodate for that with low power flashes or less lighting time with a flashlight.
All in all, a rather simple technique that yields captivating results.
Trevor Williams (aka tdub303) is a Canadian who has been stuck in Japan for over 10 years. He has busy days that leave him shooting at night. His night shots have led to him being featured in a light painting documentary titled Luminary that is due out in early 2011. He has also contributed two chapters to published book on night photography techniques. He is now shooting weddings and portraits in his free time and exhibits work at various galleries around Japan. Check him out at:
- www.fiz-iks.com (night photography and light painting)
- www.smackphoto.jp (wedding and commercial work)
- https://www.flickr.com/photos/trevor303/ (flickr)
Post from: Digital Photography School
Apple’s free remote application, simply and aptly named Remote, is pretty much everything you’d want in an iTunes remote. It can search, browse, and control any of your iTunes music libraries from your iPhone just as if you were playing the music locally. The same goes for your Apple TV. You can even bring up a keyboard to type things in to avoid the annoyance of selecting each individually with the Apple TV’s infrared remote. Regardless of how you use it, since every iPhone user is also (to some extent) and iTunes user, it’s a must-have. It’s also 100% free.
HippoRemote comes in three different versions, but even on the low (and free) end, it’s pretty much the best iPhone wireless trackpad and keyboard you could want. It connects over VNC, so if you have VNC already set up there’s nothing to do other than select a computer on your network and enter its VNC password. From there you can use the trackpad and keyboard just like it was a real, physical one. What’s pretty incredible is HippoRemote’s ability to even support multitouch gestures. I’m pretty much lost without two-finger scrolling at this point, so being able to do that on a virtual trackpad is just beautiful. If you want more than basic features (and no ads), you can upgrade to the basic version for $2 or the pro version for $5. Alternatively, if you’d rather not use VNC to connect and prefer a free piece of server software, give 
If the more complex remotes are a bit too much for you and want something a bit simple, like, say, the standard Apple remote, Rowmote is what you’re looking for. Syncing up with a free piece of Mac-only server software you install on the Mac you want to control, Rowmote is basically an exact replacement for an Apple remote you’d otherwise have to buy. It’ll set you back a dollar, but if you were planning on buying an actual Apple remote you’d be paying a whole lot more. Rowmote also offers a $5 pro version which ads a few features, such as a virtual keyboard and multi-touch trackpad. While you might find that a combination of other free applications handle this same functionality separately at no cost, Rowmote Pro rolls it all into one.
If you’re an XBMC devotee and an iPhone user, you’ve probably already downloaded this app. XBMC Remote is a fantastic remote for any XBMC configuration you may have, whether you’re running 
When you really want to control remotely, nothing gives you more control than VNC. There are a ton of VNC apps for the iPhone, however, and most of them are terribly expensive. Remoter, however, is currently on sale for $1 and is a pretty feature rich VNC app. While the vast number of buttons were a little intimating at first, their functionality is pretty clear and they’re small enough to stay out of your way. Setting things up is as simple as entering your VNC information and pressing connect. Remoter gives you just about every option you’d need in a VNC client and, in testing, seemed perfectly stable (which is something I can’t say about the other cheap VNC apps I’ve tried). Nonetheless, if the $1 sale price is a bit too steep for your tastes, you can always enjoy the average but free 
Today during the Media Panel at 
When it launched, millions of us grabbed free Gmail addresses, and associated Calendar, Docs, Voice, and other apps followed. But personal domains are cheap, and claiming an @yourname.com address to use with Google Apps is easier than ever. Here’s why you should.
If you do freelance work on the side, it’s easy to create another account (design@smith.com), one that pipes into your main personal account (john@smith.com). If you decide to help organize a fundraiser, it’s a few minutes to create another account for that (fundraise@smith.com), one that doesn’t give away your personal address to folks you’ll only message once or twice. When your kids get to the age where they get web-savvy, you can set them up with an email address (tina@smith.com and johnjr@smith.com) that you have ultimate control over. And for relatives with occasional tech troubles, you can throw them a lifeline and set them up on your server, too.